0.18mm edm molybdenum wire FR500G New Design
Molybdenum Wire Cut Machine Standard Configuration:
1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
9) Automatic double direction wire tension system
10) Standard ±6 degree taper cutting system
Cooperate Suppliers:
Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)
Molybdenum Wire Cut Machine Featurers:
1) Parameter is not required to put in, Artificial Intelligence
works out perfect parameter
immediately after putting in cutting thickness and wire diameter,
Different accuracy based on different workers with different
experience will be solved.
2) Roughness: Ra ≤0.8um
3) 3 Time Cutting thickness : ≥200mm
4) Max Machining Speed: 200mm2/min
Factory Situation:
1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese
market each year.
2). Over 8000 sets EDM machines installed in China or other
countries.
3). 8 steps checking for each machine by more than 25 QCS.
4). 20 years experience on EDM Machines (From 1997) , 300
employees.
5). 20 research personnel for developing new models or accessories.
Molybdenum Wire Cut Machine Parameters
| Item | unit | FR-400G/M/S | FR-500G/M/S | FR-700G/M/S |
| Worktable size (L×W) | mm | 550*680 | 580*770 | 720*1040 |
| Table travel(X×Y) | mm | 300*400 | 350*500 | 450*700 |
| Max. work piece thickness | mm | 250 | 250 | 300 |
| U.V axis | mm | 20*20 | 20*20 | 20*20 |
Max. taper angle/plate thickness | degree/mm | ±6°/80mm G model ±12°/80mm M model ±6°/80mm S model |
Motor type | step or servo | G model Step motor M model Step motor S model Servo motor |
| Wire diameter | mm | 0.16-0.20 | 0.16-0.20 | 0.16-0.20 |
| Machine accuracy | Octagon | mm | ±0.005 | ±0.005 | ±0.005 |
| Angle | mm | 0.012 | 0.012 | 0.012 |
| Roughness, thrice cutting | um | ≤0.8 | ≤0.8 | ≤0.8 |
| Max. machining speed | mm²/min | 200 | 200 | 200 |
| Machine dimensions(W×L×H) | mm | 1160*1650*1850 | 1300*1770*1880 | 1730*2020*2080 |
| Machine weight | Kg | 1500 | 1700 | 2300 |
| Controller dimensions(W×L×H) | Mm | 600*800*1800 | 600*800*1800 | 600*800*1800 |
| Wire traveling speed | m/min | 5-11 | 5-11 | 5-11 |
| Load of table | Kg | 350 | 400 | 600 |
| Rated Power | KVA | 3 | 3 | 3 |
| Water tank dimension(W×L×H) | mm | 580*960*660 | 580*960*660 | 580*960*660 |
| Working reservoir capacity | L | 150 | 150 | 150 |
Molybdenum Wire Cut Machine Introduction
We adopt 6 sets high lever linear guide way on the traveling system
including X,Y axis and other running accessories, X,Y axis adopts 2
sets high level ball screw. Wire Swing system: the first company
adopt linear guide way, make the travel move smoothly without any
obstruction, it make sure the swing without any wear, solve the big
obstruction, big wear, etc problem from the V shape guide way.Tape
or Angle part: UV axis tape unit has got national patent, patent
number:2L2008200332261. Perfect design high lever tape unit, make
high accuracy for moving and tape cutting. Wire Tension System:
National patent number: 2L200820000226.7. Adopt double direction
wire tension system, keep the wire tension with same strength
during the working time, which can protect the wire and reduce the
wire broken possibility.
